Model 05 is a 27.6 m² open-plan prefab cabin designed for offices, studios, guest spaces, and sites with limited utility access.
The cabin measures approximately 5780 × 4780 mm and features a gable roof with optional roof- and façade-mounted solar panels.
The standard layout is an open room without a fixed kitchen, bathroom, or bedroom. These functions can be added according to the intended use, energy demand, and local requirements.
Product Type
Solar-ready prefab studio cabin
Bedrooms
Open layout
Floors
1
Structure
Timber / Galvanized steel framing
Delivery
Building kit / More integrated
External Footprint
27.6 m² / 297 sq ft
External Size
L5780 × W4780 mm
Cabin Height
3670 mm
Ground Clearance
400 mm
Garage
No
The standard plan provides one flexible room that can accommodate:
Partitions, windows, sockets, lighting, HVAC, and furniture should be confirmed before production.
A project-specific system can include:
Solar capacity is based on expected electrical loads, sunlight, orientation, and shading. Façade-mounted panels can be relocated or removed when roof-mounted panels are more practical.
The roof and solar system should be designed together.
Key details include:
Solar brackets and cables must not interrupt the main waterproofing layer.
- Timber or galvanized steel frame
- Prefabricated floor, wall, and roof systems
- Pitched-roof components
- Exterior cladding
- Basic interior wall and ceiling panels
- Entrance door
- Structural connectors
- Factory-prepared openings
- Solar mounting zones
- Cable routes
- Inverter and battery locations
- Distribution-board location
- Earthing and protection planning
- Roof-penetration coordination
- Wall and ceiling finishes
- Flooring
- Lighting and sockets
- Skirting and trims
- Storage cabinets
- Workstations
- Air-conditioning preparation
- Selected furniture
- Compact kitchenette
- Bathroom module
- Sleeping area
- Internal partitions
- Additional windows
- Glazed or sliding doors
- Ventilation
- Heating and cooling systems
Lyngou can coordinate the prefab structure, material preparation, solar-ready provisions, selected interior options, packing, and delivery planning.
The local team normally handles:
01
02
03
04
05
Building Kit:
Factory-prepared components assembled locally; best for export, restricted access, local crews, and lower shipping volume.
Sectional or More Integrated:
Larger prefabricated sections connected on-site. Only available after confirming route, access, lifting, weight, and permit requirements.
Building-kit delivery is applied in most cases.
Pricing mainly depends on:
The cabin measures approximately 5780 × 4780 mm, with an external footprint of 27.6 m² / 297 sq ft.
The entrance steps extend approximately 1650 mm beyond the cabin body.
Not by default.
Off-grid performance depends on solar capacity, battery storage, inverter size, sunlight, electrical loads, and backup requirements.
They can be included as part of the confirmed solar package.
The quotation should list the panels, mounting system, inverter, batteries, cables, monitoring equipment, and installation responsibilities.
Not in the standard open-plan layout.
A kitchenette, bathroom, sleeping area, or partitions can be added as project options.
Building-kit or sectional delivery is normally recommended because the cabin is approximately 4780 mm wide.
Integrated delivery requires a route and logistics review.
Tell us your project location, intended use, quantity, energy requirements, and preferred delivery method.
We will help you confirm layout, solar and battery system, structure and insulation, factory and local scope, and project quotation.
Tell Us About Your Project
